| C JEENXI JMV-1100 | |||
| CONTENTS | ITEMS | UNITS | JMV-1100 |
|---|---|---|---|
| Axes travel | X axis travel | mm | 1100 |
| Y axis travel | mm | 600 | |
| Z axis travel | mm | 600(120-720*) | |
| Z axis travel (BT40) – opt. | mm | – | |
| Z axis travel (BT50 belt type)-opt. | mm | – | |
| Z axis travel (BT50 gear head)-opt. | mm | – | |
| Table | Table area | mm | 1250 x 650 |
| Max. load of table | kgs | 880 | |
| T-slot | mm | 5 x 18 x 125 | |
| Spindle | Spindle taper | type | BT-40 |
| Spindle speed – Belt | rpm | 10000 | |
| Spindle speed – Direct drive – opt. | rpm | 10000 / 12000 / 15000 | |
| Spindle motor | kw | 7.5 / 11 | |
| Spindle cooling | type | oil cooler | |
| Feed Rate | Rapid traverse (X,Y,Z) | m/min | 18 / 18 / 15 |
| Cutting feed rate | mm/min | 1-10000 | |
| X,Y,Z axis servo motor (FANUC) | kw | 2.5 / 2.5 / 2.5 | |
| X,Y,Z axis servo motor (MITSUBISHI) | kw | 3.5 / 3.5 / 3.5 | |
| A.T.C | Magazine type | type | Arm |
| Tool magazine capacity | pcs | 24 | |
